Category: Dispensing, Potting & Sealing Equipment

Dual-Head Two-Component Adhesive Dispensing Machine for Filter Element End Caps, GTA-200

Model: GTA-200

Dual-Head Two-Component Adhesive Dispensing Machine for Filter Element End Caps

Used for the Two-conponents AB adhesive injection process of filter paper element end caps, and the injection process of eco-friendly filter element plastic end caps.

Request a quote

Technical specifications

Air pressure
0.6 MPa
Effective End Cap Diameter
Φ60–Φ120 mm
Workpiece Capacity
Up to 2 pieces per cycle
Production Speed
50 pairs/min (approx. 15 g per dispensing shot)
Adhesive Viscosity
32000±10000 mPa·s
Compatible Adhesives
Two-component polyurethane, epoxy and suitable UV-curable adhesives
VIEW ALL SPECIFICATIONS (21)
Adhesive Density
1.70±0.005 g/cm³
Adhesive Mixing Ratio
Adjustable from 1:1 to 10:1; customizable on request
Adhesive Dispensing Rate
2–20 g/s, adjustable
Dispensing Accuracy
Within ±0.5 g per end cap
Power Supply
220 VAC, 50 Hz
Conveyor Motor
0.12 kW variable-speed motor
Tray Drive Motor
0.75 kW servo motor
Adhesive Supply Pump Air Pressure
≤0.45 MPa
Total Power
10 kW (including heating)
Equipment Weight — Main Unit
522 kg
Equipment Weight — Adhesive Tank
300.5 kg
Equipment Weight — Cleaning Tanks
45 kg (total for 2 tanks)
Overall Dimensions (L×W×H) — Main Unit
1750×1300×2050 mm
Overall Dimensions (L×W×H) — Adhesive Tank
1250×1050×1800 mm
Overall Dimensions (L×W×H) — Cleaning Tanks
400×400×880 mm each, 2 units

Configurations and technical specifications may change as we continue to improve and upgrade our equipment. The final configuration and specifications are those of the equipment delivered.

Ready to discuss your production requirements?

Your quote list

0 models selected

Review your selected machines, then send one enquiry.

Your quote list is empty. Close this window and add a machine to get started.