LINE PLANNING

Filter Element Production Line

滤芯产线

Start with the filter media, element dimensions and end-cap design. These determine how to pleat and join the media, dispense adhesive and assemble the element.

Products:
Pleated filter elements with bonded end caps
Reference equipment:
3 groups
Automatic filter paper clipping machine, representative family photo

Line Overview

Cover image: JTA-250-12, an example from the equipment catalogue.

Operations to plan

  1. Pleat the filter media Use the media width and required pleat height to review the forming process.
  2. Join the pleated media For designs using a steel strip, clip the two ends of the pleated paper together.
  3. Dispense end-cap adhesive Choose dispensing equipment to suit the end cap and adhesive. PVC and two-component adhesives are separate configurations.
  4. Assemble the element Plan how the pleated media, end caps and any center tube reach the assembly position.
  5. Cure the assembled element Confirm the adhesive specification and curing method together before selecting curing equipment.

What to share for a line review

Send the element drawing, media width and pleat height, end-cap details, adhesive specification and target output.

GET IN TOUCH

Review this production line with ZENYE.

Send the element drawing, media width and pleat height, end-cap details, adhesive specification and target output.

LINE INQUIRY

Filter Element Production Line

Capacity and final delivery scope will be confirmed during technical review.

Request a consultation